Tips on how to install blinds

Tips on how to install blinds

Blinds are installed by installing the vertical slats into the window frame. For the best results, you should be able to install all 4 slats in about 10 minutes with a drill, screwdriver, and ladder. All you need to do is measure your window, choose the best blinds for it, and then install them. If you have the question, is it hard to install blinds? you need to know the following tips.


Tips on how to install blinds


  1. Measure your window


Measure your window before buying and installing blinds. Measure the width of the bottom horizontal bar. If you buy blinds that do not fit the width, there will be gaps between the vertical slats when installed. The gaps mean that stray light will enter your room through the gap and give an unpleasant feel to your room.


  1. Buy blinds with good materials

Tips on how to install blinds

Blinds are made of wood, polyester, or vinyl material. Before you purchase blinds, check their quality label, which should be provided by the manufacturer for easy identification of good materials from poor quality ones at a glance.


  1. Choose the right size of blinds


The right size of blinds is measured by the length and width of the bottom horizontal bar. Measure these dimensions using a tape measure, measuring tape or ruler. Be sure to measure your window’s width clearly, because you want the bottom horizontal bar on the blinds to be even with it. Otherwise, there will be gaps that are not pleasant to look at.


  1. Take the measurements to get the best fit


After you have measured your window’s width, then measure the length and width of the bottom horizontal bar on each blind. It is best to measure your blinds after you have removed all of the outside landscaping trees. In this way, you will not have to worry about measuring an inappropriate width or length when installing blinds. If you order blinds that do not match these dimensions, there will be gaps between vertical slats or an improper fit once installed because they are too narrow or too long.


  1. Choose the right length of vertical slats


The length of vertical slats should be measured according to the number of horizontal slats in it. For example, if you have 4 horizontal slats, then there should be four vertical slats. Most blinds come with a standard size for a standard window. If you want to change the size, you can reduce the number of vertical slats for a narrower blind or increase them for a wider one. This will help you get a perfect fit without any gaps between the vertical slats.


In conclusion, is an informative website that will provide you the different ranges of blinds with detailed information and value research. They also provide the detailed installation guide and online measuring tool for every kind of blinds. You can get in contact with their staff if you have any questions.

Looking for something to add a little warmth to the room? Find out more here:

Leave a Reply

Your email address will not be published. Required fields are marked *